A2FIX - 555 (APPLY TO FIX)
BROAD ADHESION ADHESIVE
A2FIX – 555 (APPLY TO FIX) is a water-resistant GREY Cement & polymer base tile adhesive. Mixed with water, it is suitable for fixing floor and wall tiles including porcelain, fully vitrified, mosaics, brick slips and stone claddings. Its adhere to most common substrates in the construction industry Suitable for interior and exterior areas including patios. Tiles can be grouted 24 hours after fixing.
ADVANTAGES
- Very good free flowing behavior.
- Very high bond & tensile strength.
- Easy to apply
- Can be used in showers, swimming pools or under continuous immersion.
- For fixing ceramic floor and wall tiles.
- Developed to deliver advanced fixing solutions.
AREAS OF APPLICATION
- Marbles, Glass tiles, Mosaic tiles.
- Swimming pools.
- Bathroom interior / exterior surfaces
- Tile on tile application for floor.
SUITABLE SUBSTRATES
- Concrete, even on fresh concrete
- Glass
- Glazed tile
- Wood
SURFACE PREPARATION
The surface should be properly leveled, sound, clean and free from dust, oil or grease & it should be in pre wet condition. All plumbing work should done before and placing bedding for tiling.
COVERAGE
Approximately 45-50 sq. ft per 20 kg.bag with ( 6mm X 6mm ) square notch trowel for a bed thickness of 3mm.
MIXING
Mix of approx. 3 parts powder to 1 part water by volume. Add the powder to clean water and mix thoroughly until a smooth uniform consistency is obtained.
APPLICATION
- Spread the adhesive with a suitable notched trowel to cover approximately 1 m².
- Place and press the dry tiles firmly into the adhesive, checking periodically that good contact is maintained with the backs of the tiles.
- Remove all surplus adhesive with a damp cloth before it sets.
GROUTING
Grouting can be carried out after a properly setting of tiles.
PACKING: 20KG
COLOR: GREY
TECHNICAL INFORMATION
- Appearance: Free flowing powder
- Color: White/Grey
- Bulk density, g/cc: 1.6
- Pot life @ 25°C: 4 HOURS
- Open time, in minutes: 30 MINUTES
- Adjustability time: 30 MINUTES
- Trafficable time: 24 Hours
- Adhesion strength [Dry/wet.heat, freez-thaw (EN1348, EN1324): >1.4 N/mm2
- Adhesive performance Category: C-2
- Mixing Ratio: 35% of powder
Where, sc = standard climate (23°C± 2, 50%± 5 RH, MV = mean value)
Get Free Quote
+91-8708217870
info@aerosealchem.com