A2FIX - 777 (APPLY TO FIX)
BROAD ADHESION ADHESIVE
A2FIX-777 (APPLY TO FIX) is an industry-grade water-resistant powder-based tile adhesive. Mixed with water, it is suitable for fixing floor and wall tiles including porcelain, fully vitrified, mosaics, quarry, brick slips and stone claddings. It adheres to all common substrates in the construction industry and is suitable for interior and exterior areas including patios. Tiles can be grouted 24 hours after fixing. The set adhesive is frost and water-resistant and can be used in showers, or under continuous immersion such as swimming pools.
ADVANTAGES
- Easy to apply
- Very good free flowing behavior for application
- Very high bond and tensile strength for fixing heavy slabs
- Can be used in showers, swimming pools or under continuous immersion.
- For fixing ceramic floor and wall tiles
- Developed to deliver advanced fixing solutions
- UV Resistance for exterior applications
AREAS OF APPLICATION
- Marbles, Glass tiles, Mosaic tiles.
- Swimming pools.
- Bathroom interior / exterior surfaces
- Tile on tile application for floor.
SUITABLE SUBSTRATES
Concrete, even on fresh concrete
- Glass
- Glazed tile
- Wood
SURFACE PREPARATION
The surface to be tiled should be level, clean and free from dust, grease or any loose flaking material.
MIXING
Mix of approx. 3 parts powder to 1 part water by volume. Add the powder to clean water and mix thoroughly until a smooth uniform consistency is obtained.
GROUTING
Grouting can be carried out after a properly setting of tiles.
APPLICATION
- Spread the adhesive with a suitable notched trowel to cover approximately 1 m².
- Place and press the dry tiles firmly into the adhesive, checking periodically that good contact is maintained with the backs of the tiles.
- Remove all surplus adhesive with a damp cloth before it sets.
PACKING: 20KG
COLOR: GREY & White
TECHNICAL INFORMATION
- Appearance: Free flowing powder
- Color: White/Grey
- Bulk density, g/cc: 1.6
- Pot life @ 25°C: 4 HOURS
- Open time, in minutes: 30 Minutes
- Adjustability time, minutes: 30 Minutes
- Trafficable time: 24 Hours
- Adhesion strength [Dry/wet.heat, freez-thaw] (EN1348, EN1324): 1.6 N/mm2
- Adhesive performance Category: C-2
- Mixing Ratio: 35% of powder
Get Free Quote
+91-8708217870
info@aerosealchem.com