A2FIX - 111 (APPLY TO FIX)
A2FIX – 111 (APPLY TO FIX) is cement based floor tile adhesive for the fixing of ceramic tiles in indoor and covered outdoor situations. It can be used over concrete floors or sand and cement topped floors. The adhesive is recommended for fixing ceramic tiles, slate and natural stone e.g. sandstone.
ADVANTAGES
- Easy to Use.
- Suitable for thin bed fixing.
- For fixing ceramic floor and wall tiles.
- Developed to deliver advanced tile fixing solutions.
AREAS OF APPLICATION
- For fixing ceramic, vitrified floor tiles.
- For thin bed fixing in interiors.
- Specially made to new construction.
SUITABLE SUBSTRATES
- Brick masonry
- Cement plaster
- Concrete surface
- Cement mortar bed
Precautions & Limitations
- Always add powder to liquid and not liquid to powder.
- While working in temperature more than 35°C always dampen the substrate & finish faster.
- Tiling should not be done when surface temperature is not below 5°C and not more than 45°C
SURFACE PREPARATION
The surface should be properly leveled, sound, clean and free from dust, oil or grease & it should be in pre wet condition. All plumbing work should done before and placing bedding for tiling.
CAUTION
A2Fix-111 (Apply To Fix) should NOT be used on painted, metal surfaces, ply & gypsum boards.
COVERAGE
Approximately 45-50 sqr. ft per 20 kg. bag with ( 6mm X 6mm ) square notch trowel for a bed thickness of 3 mm.
PACKING: 20KG
COLOR: GREY
TECHNICAL INFORMATION
- Appearance: Free flowing powder
- Color: White/Grey
- Bulk density, g/cc: 1.6
- Pot life @ 25°C, minutes: 60-90
- Open time, in minutes: 10-15
- Adjustability time, minutes: 5-7 minutes
- Trafficable time: 36 Hours
- Mixing Ration: 30-33% of Powder Part
Get Free Quote
+91-8708217870
info@aerosealchem.com