A2FIX - 222 (APPLY TO FIX)
HIGH STRENGTH ADHESIVE (C-1 Category)
A2FIX – 222 (APPLY TO FIX) Tile Adhesive is polymer modified cement base powder tile adhesive. It is suitable for wall tiling on plastered & floor tiling on cementitious surface. It has high bonding strengths and long life.
ADVANTAGES
- It is a water-resistant floor & wall tile adhesive.
- Easy to apply on both wall and floor area.
- Can be used in showers, swimming pools or under continuous immersion.
- For fixing ceramic & vitrified floor and wall tiles
- Developed to deliver advanced fixing solutions
AREAS OF APPLICATION
- For fixing ceramic, vitrified floor and wall tiles in interior and exterior applications.
SUITABLE SUBSTRATES
- Brick masonry and plaster surface
- Concrete and cement mortar bed.
- Cement sand screeds.
Precautions & Limitations
- Always add powder to liquid and not liquid to powder.
- While fixing tiles temperature must be between 5°C to 45°C. Always dampen the substrate & finish faster.
SURFACE PREPARATION
The surface should be properly leveled, sound, clean and free from dust, oil or grease & it should be in pre wet condition. All plumbing work should done before and placing bedding for tiling.
MIXING
TMix of approx. 3 parts powder to 1 part water by volume. Add the powder to clean water and mix thoroughly until a smooth uniform consistency is obtained.
CAUTION
A2FIX – 222 (APPLY TO FIX) should NOT be used on painted, coated or any metal surfaces.
GROUTING
Grouting can be carried out after a properly setting of tiles.
COVERAGE
Approximately 45-55 sq.ft per 20 kg.bag with ( 6mm X 6mm ) square notch trowel for a bed thickness of 3 mm.
APPLICATION
- Spread the adhesive with a suitable notched trowel to cover approximately 1 m².
- Place and press the dry tiles firmly into the adhesive, checking periodically that good contact is maintained with the backs of the tiles.
- 3. Remove all surplus adhesive with a damp cloth before it sets.
PACKING: 20KG
COLOR: Grey & White
TECHNICAL INFORMATION
- Appearance: Free flowing powder
- Color: White/Grey
- Bulk density, g/cc: 1.6
- Pot life @ 25°C, minutes: 60-90
- Open time, in minutes: 10-15
- Adjustability time, minutes: 10
- Trafficable time: 35-40 Hours
- Adhesion strength [Dry/wet.heat, freez-thaw (EN1348, EN1324): >0.8N/mm2
- Adhesive performance Category: C-1
- Mixing Ratio: 30-35% of powder
Where, sc = standard climate (23°C± 2, 50%± 5 RH, MV = mean value)
Get Free Quote
+91-8708217870
info@aerosealchem.com